While door hardware are designed for durability, most of door hardware lose efficacy because of improper maintenance.For example, zinc alloy door handles in coastal areas may be oxidized in a year; The wear degree of lock tongue is greater in places with large flow of people such as hotels and hospitals.  As a 17 year manufacturer of door hardware, YALIS sincerely recommends three strategies that can maximize the service life of door hardware after scientific experiments.

Material classification curing method

5-step scientific cleaning process

1. Power off protection: smart handle turns off the power first (short circuit prevention)

2. Dry brush for dust removal: use a bristle brush to remove the accumulated dust at the hinge gap.

3. Dissolve oil stain: spray precision electronic cleaner (without damaging the coating)

4. Deep lubrication:

Hinge shaft: syringe precisely injects lithium grease

Lock cylinder: graphite powder is poured vertically, and the rotating key is evenly distributed

5. Anti corrosion treatment: cotton swab coated with automotive grade coating agent (forming a hydrophobic layer

Coping strategies for special environment

1. coastal high humidity area

Annual mandatory:

Replace magnesium sacrificial anode block (adsorption salt spray corrosion)

Spray marine grade antirust paint (such as rust oleum)

2. extremely cold area

Use -40 ℃ low temperature grease

Installation of antifreeze door suction: avoid positioning failure caused by icing

3. high frequency commercial scenarios

Hospital/hotel:

Enable the IOT monitoring system to give real-time warning of worn parts

Adopt quick disassembly structure design, and complete the replacement of spare parts in 10 minutes